Cut the ethernet cord and join the Wi-Fi Raspberry Pi revolution!

The Raspberry Pi mini computer is so small that those dangling USB cables can make creating projects cumbersome. You can out the cable that connects it to the Internet by switching to -Fi. All you need is a compatible USB -Fi adapter, which you can pick up at most electronics and office supply stores. The setup process is simple if you follow the steps below.

How to get started with Raspberry Pi

How to connect the USB -Fi adapter

Before you boot up your Raspberry Pi, make sure the -Fi adapter is plugged in.

Connect the Wi-Fi adapter to any open USB port on the Raspberry Pi.

Raspberry Pi with Wi-Fi adapter

Connect all additional peripherals, like the monitor, keyboard and mouse.

Connect the Raspberry Pi to its microUSB power source.

Raspberry Pi with connected Wi-Fi adapter

When the Raspberry Pi boots up, it will automatically recognize the Wi-Fi adapter if it is compatible.

How to check to make sure Raspberry Pi recognizes your USB Wi-Fi adapter

It is important to make sure your Wi-Fi adapter is compatible with your Raspberry Pi. Adafruit has a list of compatible Wi-Fi adapters for Raspberry Pi, but a Google search will bring a plethora of options. Once your Raspberry Pi has booted up, you can check the boot list to make sure it recognizes your Wi-Fi adapter.

Select Terminal to open a command window. It is the icon in the upper left corner of the screen that looks like a computer monitor

When Terminal opens, type the following command: dmesg | more

Opening Terminal on Raspberry Pi

Press Enter on the keyboard. A long list of boot code will appear.

Tap the space bar to page down, about 10 times, until you see the highlighted boot reference below.

Wi-Fi adapter recognized in Raspberry Pi

This code confirms that Raspberry Pi recognizes the connected USB Wi-Fi adapter. If the highlighted code isn’t on the boot list, your Wi-Fi adapter may not be compatible.

How to log on to the local Wi-Fi network

Logging on to the local Wi-Fi network is just about as easy as joining on your home computer.

Select the Wi-Fi icon in the upper right corner of the screen. A list of nearby networks will appear.

Select the network you wish to . A password entry window will appear.

Logging into local Wi-Fi on Raspberry Pi

Enter the Wi-Fi password in the form next to Pre Shared Key.

Select OK.

Entering Wi-Fi password on Raspberry Pi

You will be logged onto the local Wi-Fi network and ready to go online.

Raspberry Pi

See CanaKit’s starter kitHow to get startedHow to set up Wi-FiHow to take a screenshotBest projects for iPhoneRaspberry Pi hub<!–*/<!–*/<!–*/*//*–>*//*–>*//*–>*/

Related Posts
Leave a reply